BioHygiene Gum Mark and Graffiti Remover
Product Details
Gum, Mark & Graffiti Remover utilises a powerful, safe, eco friendly, non flammable organic solvent to remove chewing gum, adhesives, tyre and other black marks, graffiti such as ink, permanent marker/spray paint and nail varnish from a variety of surfaces
|
Specification
Contains: Organic solvents, wetting and cleaning agents
Usage
Gum Removal: Spray neat product over the affected area. For non vinyl floors such as tiles, concrete etc allow 3 minute contact time. Gently scrape the underside of the gum deposits with a plastic or metal scraper to lift residues from the surface. For vinyl floors allow 30 seconds contact time and use as above.
Mark Removal: Firstly apply BioHygiene All Surfaces & Floor Cleaner to clean and remove any surface debris. Work on a small area at a time. Spray neat product sparingly over the affected area. For non vinyl floor such as tiles or concrete allow a minimum contact time of at least 3 minutes, wipe the area with a cloth or pad to remove the stain or go over the affected surface with a scrubber drier to complete the cleaning process and remove all black marks. For vinyl floors, allow 30 seconds contact time and use as above.
Grafffiti Removal:Coverage rates for graffiti removal vary significantly depending on factors such as: age, type and thickness of the graffiti, temperature, moisture, porosity, substrate and equipment used. For heavy duty graffiti removal a repeat application may be necessary to completely remove all traces of graffiti. Spray neat product liberally over the affected area. Allow a minimum contact time of at least 3 minutes and gently scrub the surface. Rinse as necessary or wipe clean.
